Revision as of 11:41, 3 January 2019 view source Pavlina Monhartova (talk \| contribs) Bureaucrats, Administrators 5,365 edits No edit summary ← Older edit		Revision as of 11:44, 3 January 2019 view source Pavlina Monhartova (talk \| contribs) Bureaucrats, Administrators 5,365 edits No edit summary Newer edit →
Line 15: \| Inlet_Type\|\|For a VPI or Q pit, the name of a pit inlet type in the Pit Inlet Database. Not used for other pits. \|- \| VP_Sur_Index\|\|Only used for VPI pits if using the HPC solver. In the event that the total flow into the VPIs on the same VP_Network_ID exceeds the maximum outflow capacity ~~of the VPOs of that VP_Network_ID~~ (see Qmax below), one or more of the VPI flow rates must be modified~~. The surcharge index is used to determine how VPI flows are adjusted~~. The VPIs with the lowest surcharge index are given priority. \|- \| VP_QMax\|\|VPI and VPO if using the HPC solver: For VPOs the maximum flow that can discharge back into the 2D domain. ForVPIs the maximum surcharge capacity or flow back on to the 2D domain. To prevent a VPI from surcharging enter a QMax of 0.0 (zero).

Check Files 1d pit A: Difference between revisions