Revision as of 01:25, 4 January 2019 view source Tuflowduncan (talk \| contribs) Bureaucrats, Administrators 1,221 edits →Method ← Older edit		Revision as of 01:27, 4 January 2019 view source Tuflowduncan (talk \| contribs) Bureaucrats, Administrators 1,221 edits →Method Newer edit →
Line 55: <li>The Pit Inlet Database has been created and can be found within '''Module_data\Pipe_Network'''. Copy the csv files '''pit_inlet_curves.csv''' and '''pit_inlet_dbase.csv''' into a new folder entitled '''pit_dbase''' within the TUFLOW folder. <li>Open the '''pit_inlet_dbase.csv''' file. The Pit Inlet Database is similar to the Boundary Condition Database in that it references an external source file and relates this to corresponding GIS objects within the model. <br> The first column contains the name of pit inlet type as referenced in the Inlet_Type attribute that was specified within the '''~~1d_nwk_M07_Pits_001_P~~1d_nwk_FMT_M02_Pits_001_P''' layer. The second column contains the name of the source .csv file that contains the depth-discharge curve. The third and fourth columns are the heading labels of the depth and discharge columns respectively in the source .csv file. The fifth and sixth columns are the inlet’s nominated full flow area in m<sup>2</sup> and flow width in m. Section 5.12.3 of the 2017 TUFLOW Manual provides further information on the Pit Inlet Database. <br> <br> [[File:M07 pit inlet dbase.png]]<br>

FM Tute M02 ARC Pipe Network: Difference between revisions