Difference between revisions of "TUFLOW Message 2053"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=Exceeded maximum boundary condition table size, or table size is less than 1 row. | |message_desc=Exceeded maximum boundary condition table size, or table size is less than 1 row. | ||
| − | |suggestions=Search in the .tlf file for the error and identify a boundary condition .csv that was read just before the error | + | |suggestions=Search in the .tlf file for the error and identify a boundary condition .csv that was read just before the error was written. Check the .csv file for any extra lines and unnecessary information. If required create a new .csv file and populate with essential data only. |
|discussion_page=* [[Talk:TUFLOW Message 2053|Discuss Message 2053]] | |discussion_page=* [[Talk:TUFLOW Message 2053|Discuss Message 2053]] | ||
|link3='' | |link3='' | ||
Revision as of 14:12, 17 September 2019
TUFLOW Message
ERROR 2053 - Exceeded Maximum BC table size or table size is less than 1 row.
Alternate Message
NA
Message Type
ERROR
Description
Exceeded maximum boundary condition table size, or table size is less than 1 row.
Suggestions
Search in the .tlf file for the error and identify a boundary condition .csv that was read just before the error was written. Check the .csv file for any extra lines and unnecessary information. If required create a new .csv file and populate with essential data only.
| Up |
|---|
 2xxx Messages
|