TUFLOW 1D Flood Modeller Connectivity: Difference between revisions
Content deleted Content added
Tuflowduncan (talk | contribs) |
Tuflowduncan (talk | contribs) No edit summary |
||
Line 21:
[[File:Estry Link.png|700px|Figure 2: The ESTRY 1d_nwk node layer (in blue) snapped to a Flood Modeller node (in a 1d_x1d_isis layer in orange).]]<br>
[[File:Estry Properties.png|700px|Figure 3: 1d_nwk_nodes attributes for the ESTRY node snapped to the Flood Modeller node.]]
A connector "X" channel type can be used to connect the end of the linked ESTRY channel to the ESTRY node snapped to the Flood Modeller node if the end of the ESTRY channel and the snapped Flood Modeller /ESTRY nodes are not in the same location. In this case it is important that the X-connector is drawn from the ESTRY channel (ie, the first vertex on the polyline) to the ESTRY node which is snapped to the Flood Modeller node (see Figure X). The Flood Modeller node label in the 1d_x1d_isis layer should match that within the Flood Modeller network.
[[File:X Connector.png|700px|Figure 4: Figure x: X-Connector connected the ESTRY channel DARL_OC_1 to the ESTRY Node DB_2436 which is snapped to the Flood Modeller node DB_2436. Note the direction of the X-Connector between the ESTRY channel and the ESTRY/Flood Modeller node location.]]
==Checking whether a X1DH or X1DQ Setup has been Successful==
The first location to look for confirmation that a X1DQ or X1DH connection has been picked up is to look into the simulation tlf file. This will list the number of X1DQ and X1DH connections to the Flood Modeller network.
[[File:Tlf.png|700px|Figure 4: Figure x: TLF Files showing successful activation of X1DQ connection to Flood Modeller node DB_2436.]]
The type or existence of a connection can be also be checked by viewing the Conn_1D_2D attribute in the 1d_nwk_N_ check layer.
[[File:1d nwk N Check.png|700px|Figure x: ]]
The _messages.mif/.shp layer contains CHECK 1393 messages at each ESTRY node linked to a Flood Modeller node. The presence of this message indicates that that the TUFLOW 1D (ESTRY) node has been successfully connected to a Flood Modeller node and therefore no action is required.
[[File:Messages.png|700px|Figure x: ]]
==Interrogating Results for a Flood Modeller-TUFLOW 1D Link==
Line 43 ⟶ 55:
Results can also be plotted using the TUFLOW Viewer. In the case of a X1DH link between ESTRY and FLOOD Modeller, results are shown in Figure X.
[[File:X1DH Results.png|700px|Figure x: ]]
[[File:X1DQ Results.png|700px|Figure x: ]]
| |||