TUFLOW 1D Flood Modeller Connectivity: Difference between revisions

[[File:Estry Link.png|thumb|Border|none|400px|Figure 3-The ESTRY 1d_nwk node layer (in blue) snapped to a Flood Modeller node (in a 1d_x1d_isis layer in orange).]]<br>

 

 

A connector "X" channel type can be used to connect the end of the linked ESTRY channel to the ESTRY node snapped to the Flood Modeller node if the end of the ESTRY channel and the snapped Flood Modeller /ESTRY nodes are not in the same location. In this case it is important that the X-connector is drawn from the ESTRY channel (ie, the first vertex on the polyline) to the ESTRY node which is snapped to the Flood Modeller node (see Figure 5). The Flood Modeller node label in the 1d_x1d_isis layer should match that within the Flood Modeller network.