Difference between revisions of "TUFLOW Message 1200"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
|type=[[CHECK]] | |type=[[CHECK]] | ||
|message_desc=Node at start of connector can only be used for setting up channel inverts and pit channels. | |message_desc=Node at start of connector can only be used for setting up channel inverts and pit channels. | ||
| − | |suggestions= | + | |suggestions=Check message confirming that node is not being automatically created upstream of the connector. If node is required to set up channel inverts and pit channels it needs to be added manually. |
|discussion_page=* [[Talk:TUFLOW Message 1200|Discuss Message 1200]] | |discussion_page=* [[Talk:TUFLOW Message 1200|Discuss Message 1200]] | ||
|link3='' | |link3='' | ||
Revision as of 12:58, 30 October 2019
TUFLOW Message
CHECK 1200 - Node at start of connector can only be used for setting up channel inverts and pit channels.
Alternate Message
NA
Message Type
CHECK
Description
Node at start of connector can only be used for setting up channel inverts and pit channels.
Suggestions
Check message confirming that node is not being automatically created upstream of the connector. If node is required to set up channel inverts and pit channels it needs to be added manually.
| Up |
|---|
 1xxx Messages
|