Revision as of 15:23, 29 May 2020 view source ShuangGao (talk \| contribs) Bureaucrats, Administrators 1,096 edits →Remap Other Output Grids ← Older edit		Revision as of 15:24, 29 May 2020 view source ShuangGao (talk \| contribs) Bureaucrats, Administrators 1,096 edits →Remap Other Output Grids Newer edit →
Line 40: * Hazard categories are usually depended on both water depth and velocity, and it is not straight forward to interpolate a cell averaged velocity to sub-cell scale with varying water depth. * Even if this can be done based on empirical relationship between depth and velocity, the obtained velocity is much less reliable than a actual output from a model with finer mesh. Therefore, we highly recommend refining the mesh size directly a the location where user wants to obtain finer velocity or hazard output. The figure below shows the hazard output from the 2.5/5/10/20m model, and as can be seen the result is much smoother along the gully. <br> [[File:SGS 02-20m ZAEM1.png\|350px]]<br>

TUFLOW Remapping: Difference between revisions