Difference between revisions of "TUFLOW Message 2787"

From Tuflow
Jump to navigation Jump to search
Line 5: Line 5:
 
|message_desc=This warning occurs for TUFLOW HPC simulations when SA ALL option is turned on because the "Defaults" command are set prior to 2017.
 
|message_desc=This warning occurs for TUFLOW HPC simulations when SA ALL option is turned on because the "Defaults" command are set prior to 2017.
 
|suggestions=TUFLOW HPC was only released in 2017. Please check if it is intentional to apply default settings prior to 2017.
 
|suggestions=TUFLOW HPC was only released in 2017. Please check if it is intentional to apply default settings prior to 2017.
|discussion_page=* [[Talk:TUFLOW Message 2787|Discuss Message 2787]]
+
 
|link3=''
 
|link4=''
 
 
|prelink=[[TUFLOW_Message_2786|Message 2786]]
 
|prelink=[[TUFLOW_Message_2786|Message 2786]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|nextlink=[[TUFLOW_Message_2803|Message 2803]]
 
|nextlink=[[TUFLOW_Message_2803|Message 2803]]
 
}}
 
}}

Revision as of 16:12, 12 July 2022

TUFLOW Message
WARNING 2787 - SA boundary applied as SA ALL due to use of "Defaults" command.

Alternate Message
NA

Message Type
WARNING

Description
This warning occurs for TUFLOW HPC simulations when SA ALL option is turned on because the "Defaults" command are set prior to 2017.

Suggestions
TUFLOW HPC was only released in 2017. Please check if it is intentional to apply default settings prior to 2017.


Up
Go-up.png 2xxx Messages