1D-2D Flood Modeller-TUFLOW: Difference between revisions

The image below shows the representation within Flood Modeller and TUFLOW of a simple flume model. As you can see in Flood Modeller, the end open channel section '''FMT_003''' links directly to a spill unit, housing the same cross-section data, which then links to a dummy HT boundary unit. This dummy unit is left empty and works as a link between Flood Modeller and TUFLOW. TakingTo connect the Flood Modeller schematisation1D acrossnetwork to TUFLOW, assimilar we saw into the section above, the open channel section is linked via a 1D node and 2d_bc CN/HX connection. The SX link comes into play by having another 1D node (which, for clarity, it is recommended having a separate file to the Flood Modeller Nodes) which has the same ID as the dummy HT boundary. Remember that Flood Modeller is case sensitive so name exactly as is in Flood Modeller. As the connection between the open channel section '''FMT_003''' and the dummy boundary happens in Flood Modeller, no literal link is needed between these in the TUFLOW GIS files. All that is needed otherwise is a 2d_bc file with a CN/SX link snapped to the dummy boundary node, this again can be in a separate file to the CN/HX links for clarity or can be in the same file.