TUFLOW Message 1124: Difference between revisions

Content deleted Content added

Inline

Revision as of 13:53, 20 May 2021

TUFLOW Message
ERROR 1124 - Cross-section line for channel ",a," already allocated to another channel.

Alternate Message
NA

Message Type
ERROR

Description
If a 1d_xs cross-section line crosses with a 1d channel midway, it can only allocated to one channel.

Suggestions
Check if the cross-section line is crossing with multiple 1d channels.

Up
1xxx Messages

@@ Line 3: / Line 3: @@
 |alt_msg=NA
 |type=[[ERROR]]
-|message_desc=There isn't an available cross section for channel "a".
+|message_desc=If a 1d_xs cross-section line crosses with a 1d channel midway, it can only allocated to one channel.
-|suggestions=If the cross section has three vertices, middle vertex should be snapped to the beginning or end of channel "a". Cross sections with two vertices only needs to intersect the channel.
+|suggestions=Check if the cross-section line is crossing with multiple 1d channels.
 |discussion_page=* [[Talk:TUFLOW Message 1124|Discuss Message 1124]]
 |link3=''