Difference between revisions of "TUFLOW Message 2461"
Jump to navigation
Jump to search
| Line 15: | Line 15: | ||
|prelink=[[TUFLOW_Message_2460|Message 2460]] | |prelink=[[TUFLOW_Message_2460|Message 2460]] | ||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
| − | |nextlink=[[ | + | |nextlink=[[TUFLOW_Message_2467|Message 2467]] |
}} | }} | ||
Revision as of 15:20, 9 February 2022
TUFLOW Message
ERROR 2461 - "Global Rainfall Area Factor" applied after "Global Rainfall BC".
Alternate Message
ERROR 2461 - "Global Rainfall Initial Loss" applied after "Global Rainfall BC".
ERROR 2461 - "Global Rainfall Initial Loss" applied after "Global Rainfall BC".
Message Type
ERROR
Description
The global rainfall commands:
- Global Rainfall Area Factor == <value>
- Global Rainfall Initial Loss == <value>
- Global Rainfall Initial Loss == <value>
should be specified prior to any Global Rainfall BC == <boundary name> command.
Suggestions
Change the order of the commands in the boundary control file (.tbc) to ensure that the rainfall loss and rainfall factor commands occur before the Global Rainfall BC == <boundary name> command.
| Up |
|---|
 2xxx Messages
|