Difference between revisions of "TUFLOW Message 1152"
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
|message_desc=A cross-section has been found at the channel centre (as opposed to channel ends), this takes priority and end-section(s) are being ignored. | |message_desc=A cross-section has been found at the channel centre (as opposed to channel ends), this takes priority and end-section(s) are being ignored. | ||
|suggestions=Review channel and check a centre cross-section is intentional. This usually happens with culverts, weirs and bridges embedded in 1D channels with their own cross section. | |suggestions=Review channel and check a centre cross-section is intentional. This usually happens with culverts, weirs and bridges embedded in 1D channels with their own cross section. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_1151|Message 1151]] | |prelink=[[TUFLOW_Message_1151|Message 1151]] | ||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_1153|Message 1153]] | |nextlink=[[TUFLOW_Message_1153|Message 1153]] | ||
}} | }} | ||
Revision as of 13:53, 5 July 2022
TUFLOW Message
CHECK 1152 - For channel ",a,", using centre cross-section and ignoring end cross-section(s).
Alternate Message
NA
Message Type
CHECK
Description
A cross-section has been found at the channel centre (as opposed to channel ends), this takes priority and end-section(s) are being ignored.
Suggestions
Review channel and check a centre cross-section is intentional. This usually happens with culverts, weirs and bridges embedded in 1D channels with their own cross section.
| Up |
|---|
 1xxx Messages
|