TUFLOW Message 1124: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
|message_desc=If a 1d_xs cross-section line crosses with a 1d channel midway, it can only allocated to one channel. |
|message_desc=If a 1d_xs cross-section line crosses with a 1d channel midway, it can only allocated to one channel. |
||
|suggestions=Check if the cross-section line is crossing with multiple 1d channels. |
|suggestions=Check if the cross-section line is crossing with multiple 1d channels. |
||
|discussion_page=* [[Talk:TUFLOW Message 1124|Discuss Message 1124]] |
|||
|link3='' |
|||
|link4='' |
|||
|prelink=[[TUFLOW_Message_1123|Message 1123]] |
|prelink=[[TUFLOW_Message_1123|Message 1123]] |
||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
||
Revision as of 13:48, 5 July 2022
TUFLOW Message
ERROR 1124 - Cross-section line for channel ",a," already allocated to another channel.
Alternate Message
NA
Message Type
ERROR
Description
If a 1d_xs cross-section line crosses with a 1d channel midway, it can only allocated to one channel.
Suggestions
Check if the cross-section line is crossing with multiple 1d channels.
| Up |
|---|
 1xxx Messages
|