Difference between revisions of "TUFLOW Message 3543"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
|type=[[CHECK]] | |type=[[CHECK]] | ||
|alt_msg=N/A | |alt_msg=N/A | ||
| − | |message_desc= | + | |message_desc=This is the output message from SGS Breakline Detection feature. A levee or embankment has been detected during the SGS pre-processing. |
| − | |suggestions=Consider adding breakline | + | |suggestions=Consider adding breakline to prevent water from "leaking" through the cells. |
|discussion_page=* [[Talk:TUFLOW Message 3543|Discuss Message 3543]] | |discussion_page=* [[Talk:TUFLOW Message 3543|Discuss Message 3543]] | ||
|link3='' | |link3='' | ||
Revision as of 15:14, 4 January 2022
TUFLOW Message
CHECK 3543 - Water depth required cross cell exceeds specified threshold, consider adding breakline. uDelta = "a", vDelta = "b"
Alternate Message
N/A
Message Type
CHECK
Description
This is the output message from SGS Breakline Detection feature. A levee or embankment has been detected during the SGS pre-processing.
Suggestions
Consider adding breakline to prevent water from "leaking" through the cells.
| Up |
|---|
 3xxx Messages
|