Difference between revisions of "TUFLOW Message 1178"
Chris Huxley (talk | contribs) |
|||
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=An error has occurred whilst reading 1d network data (1d_nwk). This may occur if the attribute types in the file do not match what TUFLOW is expecting for a 1d_nwk command. | |message_desc=An error has occurred whilst reading 1d network data (1d_nwk). This may occur if the attribute types in the file do not match what TUFLOW is expecting for a 1d_nwk command. | ||
| − | |suggestions= Aways use an empty 1d_nwk template file as the GIS entry for 1d_nwk inputs. DO NOT create empty 1d_nwk template files mannually yourself. Use either TCF command, <tt>Write Empty MI Files == </tt> or <tt>Write Empty SHP Files == </tt> to create these template files. Also, ensure the layer has the correct attributes and ensure that the <tt>Read GIS Network == </tt> command is only used for network data, not 1D boundary or table links. | + | |suggestions= Aways use an empty 1d_nwk template file as the GIS entry for 1d_nwk inputs. DO NOT create empty 1d_nwk template files mannually yourself. Use either TCF command, <tt><font color="blue">Write Empty MI Files </font><font color="red">== </font></tt> or <tt><font color="blue">Write Empty SHP Files </font><font color="red">== </font></tt> to create these template files. Also, ensure the layer has the correct attributes and ensure that the <tt>Read GIS Network == </tt> command is only used for network data, not 1D boundary or table links. |
|discussion_page=* [[Talk:TUFLOW Message 1178|Discuss Message 1178]] | |discussion_page=* [[Talk:TUFLOW Message 1178|Discuss Message 1178]] | ||
|link3='' | |link3='' | ||
Revision as of 14:56, 23 June 2022
TUFLOW Message
ERROR 1178 - Reading channel network data. Check 1d_nwk layer has correct attributes.
Alternate Message
NA
Message Type
ERROR
Description
An error has occurred whilst reading 1d network data (1d_nwk). This may occur if the attribute types in the file do not match what TUFLOW is expecting for a 1d_nwk command.
Suggestions
Aways use an empty 1d_nwk template file as the GIS entry for 1d_nwk inputs. DO NOT create empty 1d_nwk template files mannually yourself. Use either TCF command, Write Empty MI Files == or Write Empty SHP Files == to create these template files. Also, ensure the layer has the correct attributes and ensure that the Read GIS Network == command is only used for network data, not 1D boundary or table links.
| Up |
|---|
 1xxx Messages
|