Difference between revisions of "TUFLOW Message 2818"

From Tuflow
Jump to navigation Jump to search
(Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2818 - For nesting level 1, number of potential cells: "a" exceeds limit of : 214748647 |alt_msg=N/A |type=ERROR |message_desc=Above...")
 
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=ERROR 2818 - For nesting level 1, number of potential cells: "a" exceeds limit of : 214748647
+
|tuflow_message=ERROR 2818 - For nesting level 1, number of potential cells: "a" exceeds limit of : 2147483647
 
|alt_msg=N/A
 
|alt_msg=N/A
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=Above features such as output zones are not yet supported in Quadtree.
+
|message_desc=Number of potential cells exceeds the limit.
|suggestions=Remove those features for now or use HPC without Quadtree. For more information or suggestion, please contact <font color="blue">support@tuflow.com</font>
+
|suggestions=Check the nesting level has been setup correctly.
 
|discussion_page=* [[Talk:TUFLOW Message 2818|Discuss Message 2818]]
 
|discussion_page=* [[Talk:TUFLOW Message 2818|Discuss Message 2818]]
 
|link3=''
 
|link3=''

Revision as of 15:42, 30 August 2021

TUFLOW Message
ERROR 2818 - For nesting level 1, number of potential cells: "a" exceeds limit of : 2147483647

Alternate Message
N/A

Message Type
ERROR

Description
Number of potential cells exceeds the limit.

Suggestions
Check the nesting level has been setup correctly.


Up
Go-up.png 2xxx Messages