Difference between revisions of "TUFLOW Message 1280"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=Channel inverts are not specified. | + | |message_desc=Channel inverts are below node bed level. Either channel inverts are not specified or were entered incorrectly. |
| − | |suggestions= | + | |suggestions=Correct channel inverts. |
|discussion_page=* [[Talk:TUFLOW Message 1280|Discuss Message 1280]] | |discussion_page=* [[Talk:TUFLOW Message 1280|Discuss Message 1280]] | ||
|link3='' | |link3='' | ||
Revision as of 11:06, 13 April 2022
TUFLOW Message
ERROR 1280 - Bed level at node ",a," is above that for channel ",a,".
Alternate Message
NA
Message Type
ERROR
Description
Channel inverts are below node bed level. Either channel inverts are not specified or were entered incorrectly.
Suggestions
Correct channel inverts.
| Up |
|---|
 1xxx Messages
|