Revision as of 16:48, 15 June 2022 view source Pavlina Monhartova (talk \| contribs) Bureaucrats, Administrators 5,395 edits →What is the difference between single and double precision and when should I use them? ← Older edit		Revision as of 10:02, 24 June 2022 view source Pavlina Monhartova (talk \| contribs) Bureaucrats, Administrators 5,395 edits →Can TUFLOW's 1D engine be used for modelling complex pipe hydraulics? Newer edit →
Line 59: * The 2020 TUFLOW release offers sub-grid topography sampling to process all elevations within the cell into a depth/volume relationship for its calculations. This approach ensures much more accurate water depth estimations at pit inlets, even if the 2D cell resolution is much larger than the geometry of the drain at the inlet. This in turn translates to more accurate representation of the pit inflow, and as such flow through the entire pipe network. No other 1D/2D stormwater drainage modelling software offers this functionality. The new Quadtree functionality also allows the user to model key flowpaths, such as road drains, in high resolution. * The 2D overland approach used by TUFLOW ensures any above ground inundation is defined by the model topography. This approach avoids any engineering judgement flow path definition mistakes which the 1D overland software suffer from.<br> <br> ==Can TUFLOW model non-water liquids?== Yes, this can be set with the following commands: <br> == How closely do TUFLOW results match other hydraulic software? ==

TUFLOW General Discussion: Difference between revisions