Difference between revisions of "TUFLOW Message 1037"
| Line 10: | Line 10: | ||
Interpolated cross-section properties can be found in <''runfile_''1d_ta_tables_check.csv> which is written with the 1D check files location as specified with the .ecf command <font color="blue"><tt>Write Check Files </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt><location></tt></font> | Interpolated cross-section properties can be found in <''runfile_''1d_ta_tables_check.csv> which is written with the 1D check files location as specified with the .ecf command <font color="blue"><tt>Write Check Files </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt><location></tt></font> | ||
| − | + | ||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 13:50, 22 December 2022
TUFLOW Message
CHECK 1037 - Channel <channel ID> interpolated from XS <cross-section 1> (<weighting for cross-section 1> as %) and XS <cross-section 2> (<weighting for cross-section 2> as %).
Alternate Message
NA
Message Type
CHECK
Description
A channel cross-section has not been specified, cross-sectional properties interpolated from upstream and downstream cross-sections listed. Weighting for interpolation are listed.
Cross section interpolation can be globally turned off, forcing each channel to have a cross-section specified. This is done with the .ecf command: Interpolate Cross-Sections == OFF.
Suggestions
Check if interpolatted cross-section is desired in this location.
Interpolated cross-section properties can be found in <runfile_1d_ta_tables_check.csv> which is written with the 1D check files location as specified with the .ecf command Write Check Files == <location>
| Up |
|---|
 1xxx Messages
|