Difference between revisions of "TUFLOW Message 3007"
| Line 1: | Line 1: | ||
{{TUFLOW_Message | {{TUFLOW_Message | ||
| − | |tuflow_message=ERROR 3007 | + | |tuflow_message=ERROR 3007 - Wet/dry depth threshold must be >= 0.0001. |
| − | <br> | + | |alt_msg=NA<br> |
| − | |||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=The wet/dry depth threshold has been set to a value below the minimum allowed. | + | |message_desc=The wet/dry depth threshold has been set to a value below the minimum allowed.<br> |
| − | + | The default is 0.002m (2mm) or 0.007ft if using <font color="blue"><tt>Units </tt></font> <font color="red"><tt>== </tt></font> <tt>US Customary</tt>. The depth should be selected according | |
| + | to the magnitude of flooding depths. For broad-scale models with large cell sizes, values of up to 0.05m (0.16ft) have typically been used, while for models using the direct rainfall approach, or that have a high proportion of | ||
| + | steep flow, a wet/dry depth of less than 1mm (eg. 0.0002m or 0.0007ft) may be required due to the substantial amount of shallow sheet flow. A reduced wet/dry depth of 0.0002m (0.0007ft) is particularly recommended for direct | ||
| + | rainfall models. | ||
| − | + | |suggestions=Ensure that the value specified with the "<font color="blue"><tt>Cell Wet/Dry Depth</tt></font>" tcf command is a depth > 0.0001m. | |
Revision as of 15:21, 2 March 2023
TUFLOW Message
ERROR 3007 - Wet/dry depth threshold must be >= 0.0001.
Alternate Message
NA
Message Type
ERROR
Description
The wet/dry depth threshold has been set to a value below the minimum allowed.
The default is 0.002m (2mm) or 0.007ft if using Units == US Customary. The depth should be selected according
to the magnitude of flooding depths. For broad-scale models with large cell sizes, values of up to 0.05m (0.16ft) have typically been used, while for models using the direct rainfall approach, or that have a high proportion of
steep flow, a wet/dry depth of less than 1mm (eg. 0.0002m or 0.0007ft) may be required due to the substantial amount of shallow sheet flow. A reduced wet/dry depth of 0.0002m (0.0007ft) is particularly recommended for direct
rainfall models.
Suggestions
Ensure that the value specified with the "Cell Wet/Dry Depth" tcf command is a depth > 0.0001m.
| Up |
|---|
 3xxx Messages
|