Difference between revisions of "TUFLOW Message 1303"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
|suggestions=Create a dummy channel in the 1d_nwk layer. | |suggestions=Create a dummy channel in the 1d_nwk layer. | ||
| − | |||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 10:26, 23 December 2022
TUFLOW Message
ERROR 1303 - Invalid channels per node count.
Alternate Message
NA
Message Type
ERROR
Description
There is an issue with the number of channels and nodes. The most likely cause for this is that there are manually created nodes in the 1d_nwk layer and no 1d_channels. A minimum of 1 channel is required if using manually created 1D nodes.
Suggestions
Create a dummy channel in the 1d_nwk layer.
| Up |
|---|
 1xxx Messages
|