Difference between revisions of "TUFLOW Message 2836"
| Line 14: | Line 14: | ||
|prelink=[[TUFLOW_Message_2835|Message 2835]] | |prelink=[[TUFLOW_Message_2835|Message 2835]] | ||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
| − | |nextlink=[[ | + | |nextlink=[[TUFLOW_Message_2837|Message 2837]] |
}} | }} | ||
Revision as of 12:37, 16 December 2022
TUFLOW Message
ERROR 2836 - No cells selected by point object: aa BC layer with type: bb
WARNING 2836 - No cells selected by point object: aa BC layer with type: bb
Alternate Message
ERROR 2836 - No cells selected by line object: aa BC layer with type: bb
WARNING 2836 - No cells selected by line object: aa BC layer with type: bb
ERROR 2836 - No cells selected by region object: aa BC layer with type: bb
WARNING 2836 - No cells selected by region object: aa BC layer with type: bb
ERROR 2836 - No cells selected by region object: SA boundary with name: "a"
Description
2d_bc and/or 2d_sa point/line/region doesn't select any Quadtree cells.
Suggestions
Use the latest TUFLOW release as small polygons not selecting any cell centre would trigger the error in older releases.
Check location of boundary object, or change the default setting to Check Inside Grid == WARNING or "OFF" if the boundary object can be ignored. At least one cell centre has to fall within 2d_bc and/or 2d_sa region. If grid_check file is not created, Verbose == ON can be used to output working grid check files.
| Up |
|---|
 2xxx Messages
|