Difference between revisions of "TUFLOW Message 3546"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
|suggestions=Turn off SGS materials if depth varying Manning’s n is used. Check the use of SGS materials is intentional when depth varying Manning’s n is not used and review results. | |suggestions=Turn off SGS materials if depth varying Manning’s n is used. Check the use of SGS materials is intentional when depth varying Manning’s n is not used and review results. | ||
| − | |prelink=[[ | + | |prelink=[[TUFLOW_Message_3545|Message 3545]] |
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | |uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | ||
| − | |nextlink=[[ | + | |nextlink=[[TUFLOW_Message_3547|Message 3547]] |
}} | }} | ||
Revision as of 10:50, 16 December 2022
TUFLOW Message
ERROR 3546 - SGS Materials is not supported in this build for models with depth varying Mannings n.
Alternate Message
WARNING 3546 - The SGS Materials methodology has changed for the 2022 TUFLOW release and changes in results will occur.
Description
If SGS Materials are on in combination with depth varying Manning’s n value error is issued and the simulation stops. If SGS Materials is enabled without depth varying Manning’s n values warning is issued.
Suggestions
Turn off SGS materials if depth varying Manning’s n is used. Check the use of SGS materials is intentional when depth varying Manning’s n is not used and review results.
| Up |
|---|
 3xxx Messages
|