Difference between revisions of "TUFLOW Message 2980"
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
|suggestions= Inspect downstream boundaries for accidental flow back into the model (turn on vectors). Plot dt .csv file and HPC parameters. | |suggestions= Inspect downstream boundaries for accidental flow back into the model (turn on vectors). Plot dt .csv file and HPC parameters. | ||
| − | |||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 10:08, 3 March 2023
TUFLOW Message
ERROR 2980 - HPC terminated the simulation with an ERROR.
Alternate Message
HPC ERROR Code (see hpc.tlf) = 3010
Message Type
ERROR
Description
HPC TLF error message ERROR 3010: Timestep must be >= 0.015
The minimum timestep has been reached, this changes for your selected cell size.
Suggestions
Inspect downstream boundaries for accidental flow back into the model (turn on vectors). Plot dt .csv file and HPC parameters.
| Up |
|---|
 2xxx Messages
|