Difference between revisions of "TUFLOW Message 1203"
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
*SXG<br> | *SXG<br> | ||
*SXS<br> | *SXS<br> | ||
| − | For a detalied description of these options | + | For a detalied description of these options, refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u>. |
|suggestions=Specify a valid attribute as per the list above. | |suggestions=Specify a valid attribute as per the list above. | ||
Latest revision as of 09:44, 23 September 2024
TUFLOW Message
ERROR 1203 - Invalid Conn_2D attribute at node. Cannot exceed 3 characters.
Alternate Message
NA
Message Type
ERROR
Description
An illegal Conn_2D attribute has been inputted on a 1d pit or node object. The Conn_2D attribute is used to automatically link to the 2D. Valid options are available:
- SX
- SXL
- SXZ
- SXG
- SXS
For a detalied description of these options, refer to the TUFLOW Manual.
Suggestions
Specify a valid attribute as per the list above.
| Up |
|---|
 1xxx Messages
|