Difference between revisions of "TUFLOW Message 2119"
(Created page with "{{TUFLOW_Message |tuflow_message=CHECK 2119 - SRF value is negative (adds storage) or is greater than 0.9 (little storage). |alt_msg=NA |type=CHECK |message_desc=The SRF (Sto...") |
|||
| Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[CHECK]] | |type=[[CHECK]] | ||
| − | |message_desc=The SRF (Storage Reduction Factor) value is either negative (this will increase the storage or effective surface area of the cell) or is greater than 0.9 meaning that more than 90% of the cell's storage will be removed. A cell must have some storage and TUFLOW will automatically ensure a cell's surface | + | |message_desc=The SRF (Storage Reduction Factor) value is either negative (this will increase the storage or effective surface area of the cell) or is greater than 0.9 meaning that more than 90% of the cell's storage will be removed. A cell must have some storage and TUFLOW will automatically ensure a cell's surface area is not reduced by more than 99%. If a cell's storage is maredly reduced, this may cause instabilities. To check the SRF values view the SRF attribute in the 2d_grd_check layer. Note, the SRF feature became available as at Build 2011-09-AE. |
|suggestions=Review the SRF values are appropriate. | |suggestions=Review the SRF values are appropriate. | ||
|discussion_page=* [[Talk:TUFLOW Message 2119|Discuss Message 2119]] | |discussion_page=* [[Talk:TUFLOW Message 2119|Discuss Message 2119]] | ||
Revision as of 09:51, 7 December 2011
TUFLOW Message
CHECK 2119 - SRF value is negative (adds storage) or is greater than 0.9 (little storage).
Alternate Message
NA
Message Type
CHECK
Description
The SRF (Storage Reduction Factor) value is either negative (this will increase the storage or effective surface area of the cell) or is greater than 0.9 meaning that more than 90% of the cell's storage will be removed. A cell must have some storage and TUFLOW will automatically ensure a cell's surface area is not reduced by more than 99%. If a cell's storage is maredly reduced, this may cause instabilities. To check the SRF values view the SRF attribute in the 2d_grd_check layer. Note, the SRF feature became available as at Build 2011-09-AE.
Suggestions
Review the SRF values are appropriate.
| Up |
|---|
 2xxx Messages
|