Tute Arc M01 Create Project ArcTUFLOW: Difference between revisions
Content deleted Content added
No edit summary |
|||
Line 29:
<li>The directory structure will have been created. This will be located in the parent folder, and will look like the following. The folders are as described in [[Tutorial_Module01_Archive#Setup_Model_Folders | the main tutorial 1 page]].<br>
A projection file has been created (in the model\gis folder - TUFLOW\model\gis\Projection.prj). This contains an ArcMap projection file and all GIS files input / output from the model should have this projection.<br>
A TUFLOW control file (TUFLOW\runs\Create_Empties.tcf) has been created. This contains the commands as outlined in [[Tutorial_Module01_Archive#Set_GIS_Projection_and_Create_Empty_.28Template.
A TUFLOW simulation has been started with the '''Create_Empties.tcf''' file as the input. This TUFLOW simulation has created a series of template files which has the correct projection and the correct attributes. Different input layers in TUFLOW require different attributes. For example a initial water level layer (2d_IWL_) only requires a single attribute (which is the initial water level value), whilst a 1d channel layer (1d_nwk_)has a number of attributes including channel type, upstream and downstream elevation.
</li>
[[File:Tute M01 ArcTUFLOW CreateFolders03.JPG]]
</ol>
=Conclusion=
The arcTUFLOW toolbox has been used to configure a TUFLOW project and create a series of template layers. The next step is to [[Tutorial_Module01_Archive#Define_Location_and_Dimensions_of_the_2D_Domain | define the location and dimensions of the 2D model]].
| |||