Revision as of 14:11, 7 February 2023 view source Melissa.Moghanloo (talk \| contribs) Bureaucrats, Administrators 2,918 edits No edit summary ← Older edit		Latest revision as of 20:36, 26 June 2024 view source ElizaCollison (talk \| contribs) Bureaucrats, Administrators 3,894 edits No edit summary
Line 4: \|type=[[WARNING]] \|message_desc=A 1D pit object can be connected to a maximum of 10 2D cells. \|suggestions=Change number of cells pit is connected to using the Conn_No attribute in the 1d_nwk layer. If a '''very''' large pit object is modelled which requires connection to more 2D cell than the maximum a '''SX''' boundary can be manually specified in a 2d_bc layer, this gives the user control over the cells connected to the pit. If a '''very''' large pit object is modelled which requires connection to more 2D cell than the maximum a '''SX''' boundary can be manually specified in a 2d_bc layer, this gives the user control over the cells connected to the pit. To use this approach, the 1d_nwk "Q" pit will need to be set up as a line rather than a point. \|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]

TUFLOW Message 2215: Difference between revisions