Difference between revisions of "TUFLOW Message 3034"
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
|suggestions=Check the RF and SA region definitions and ensure that there are not more than four overlapping at any point. | |suggestions=Check the RF and SA region definitions and ensure that there are not more than four overlapping at any point. | ||
| − | |||
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | |uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 10:16, 3 March 2023
TUFLOW Message
ERROR 3034 - Number of hydrograph index layers exceeded. Maximum is 4.
Alternate Message
ERROR 3034 - Number of hydrograph weight layers exceeded. Maximum is 4.
Message Type
ERROR
Description
It is permissible to have overlapping RF and SA regions that apply sources to underlying cells. However, HPC
has an inbuilt limit of 4 for the number of such sources that can be applied to any given cell.
Suggestions
Check the RF and SA region definitions and ensure that there are not more than four overlapping at any point.
| Up |
|---|
 3xxx Messages
|