Difference between revisions of "TUFLOW Message 2576"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc= | + | |message_desc=The maximum number of vertical groundwater layers is capped at 10 at the moment. |
| − | |suggestions=Please contact [mailto:support@tuflow.com support@tuflow.com]. | + | |suggestions=Please use less than 10 layers. If users needs to use more than 10 layers, please contact [mailto:support@tuflow.com support@tuflow.com]. |
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
}} | }} | ||
Revision as of 14:19, 29 May 2025
TUFLOW Message
ERROR 2576 - Vertical groundwater layer must be between 1 and <>: "<>".
Alternate Message
NA
Message Type
ERROR
Description
The maximum number of vertical groundwater layers is capped at 10 at the moment.
Suggestions
Please use less than 10 layers. If users needs to use more than 10 layers, please contact support@tuflow.com.
| Up |
|---|
 2xxx Messages
|