Difference between revisions of "TUFLOW Message 2578"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc= | + | |message_desc=Soil layer "<>" is not defined in the model. TUFLOW checks for the deepest soil layer requested in the model, and it is required that all soil layers between layer 1 and the deepest layer are defined. For example, if soil layer 2 is specified without defining layer 1, this error occurs. |
| − | |suggestions= | + | |suggestions=Make sure soil ID and thickness (or base elevation) are defined for all soil layers. |
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
}} | }} | ||
Revision as of 14:15, 29 May 2025
TUFLOW Message
ERROR 2578 - Missing vertical groundwater layer definition. Missing layer: "<>".
Alternate Message
NA
Message Type
ERROR
Description
Soil layer "<>" is not defined in the model. TUFLOW checks for the deepest soil layer requested in the model, and it is required that all soil layers between layer 1 and the deepest layer are defined. For example, if soil layer 2 is specified without defining layer 1, this error occurs.
Suggestions
Make sure soil ID and thickness (or base elevation) are defined for all soil layers.
| Up |
|---|
 2xxx Messages
|