TUFLOW Message 2816: Difference between revisions
No edit summary |
No edit summary |
||
| Line 9: | Line 9: | ||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc= |
|message_desc=TUFLOW is unable to read the input. |
||
|suggestions= |
|suggestions=Check that the input is correct. For example "Set IWL ==" is expecting an integer value and ERROR 2816 may be produced if you are reading in an input later (e.g. 2d_iwl_R.shp) which instead should be read in using "Read GIS IWL". Otherwise, please contact [mailto:support@tuflow.com support@tuflow.com]. |
||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] |
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] |
||
Revision as of 21:34, 29 February 2024
TUFLOW Message
ERROR 2816 - Unable to read integer value from "Set Code" line.
Alternate Message
ERROR 2816 - Unable to read code value from "Read GIS Code BC ==" polygon when processing Quadtree mesh.
ERROR 2816 - Unable to read code value from "Read GIS Code ==" polygon when processing Quadtree mesh.
ERROR 2816 - Unable to read IWL value after "Set IWL ==".
ERROR 2816 - Unable to read IWL value.
Message Type
ERROR
Description
TUFLOW is unable to read the input.
Suggestions
Check that the input is correct. For example "Set IWL ==" is expecting an integer value and ERROR 2816 may be produced if you are reading in an input later (e.g. 2d_iwl_R.shp) which instead should be read in using "Read GIS IWL". Otherwise, please contact support@tuflow.com.
| Up |
|---|
 2xxx Messages
|