Difference between revisions of "TUFLOW Message 2817"
Jump to navigation
Jump to search
Ellis Symons (talk | contribs) |
|||
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc= | + | |message_desc=There was an error reading in the 2d_bc GIS layer attributes. This is typically caused by incorrect attribute types or the number of attributes. |
| − | |suggestions= | + | |suggestions=Ensure that the 2d_bc GIS layer that is causing the issue has the correct attribute types (compare them to an empty 2d_bc layer or check the TUFLOW User Manual) and that the layer contains all the required attributes (e.g. you aren't accidentally using a 1d_bc GIS input). |
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
}} | }} | ||
Revision as of 23:58, 27 May 2025
TUFLOW Message
ERROR 2817 - Reading data in 2d_bc format.
Alternate Message
NA
Message Type
ERROR
Description
There was an error reading in the 2d_bc GIS layer attributes. This is typically caused by incorrect attribute types or the number of attributes.
Suggestions
Ensure that the 2d_bc GIS layer that is causing the issue has the correct attribute types (compare them to an empty 2d_bc layer or check the TUFLOW User Manual) and that the layer contains all the required attributes (e.g. you aren't accidentally using a 1d_bc GIS input).
| Up |
|---|
 2xxx Messages
|