Difference between revisions of "TUFLOW Message 1076"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[CHECK]] | |type=[[CHECK]] | ||
| − | |message_desc= | + | |message_desc=TUFLOW creates elevation vs hydraulic properties table for 1d channel with user defined cross section. This check message indicate the number of data in the table exceeded the default limit of 100 and was capped to 100. |
| − | |suggestions=Check | + | |suggestions=Check the 'Z_Increment' and 'Z_Maximum' values specified in the cross section input file. |
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
}} | }} | ||
Revision as of 15:51, 21 December 2023
TUFLOW Message
CHECK 1076 - ",a," processed data levels determined for ",a,". Limiting to 100.
Alternate Message
NA
Message Type
CHECK
Description
TUFLOW creates elevation vs hydraulic properties table for 1d channel with user defined cross section. This check message indicate the number of data in the table exceeded the default limit of 100 and was capped to 100.
Suggestions
Check the 'Z_Increment' and 'Z_Maximum' values specified in the cross section input file.
| Up |
|---|
 1xxx Messages
|