Tuflow

TUFLOW SWMM Tutorial M01: Difference between revisions

Browse history interactively
← Older editNewer edit →
Content deleted Content added
VisualWikitext
Line 64:
 
=== Create 1D/2D Connections===
The following instructions introduce a new tool that automates the creation of 1D/2D connections. For 1D SWMM, HX lines are required from the upstream end of the culvert, and SX connections are used at the downstream end of the culvert.
<ol>
<li>Select (Left mouse click) '''Links-Conduits''' in the QGIS Layers panel.
Line 79 ⟶ 80:
<li>'''Length of BC lines''' = 10
 
<li>'''Output Layer'''= Select: Save to GeoPackage. Choose M06_5m_003TS01_001.gpkg in the Module_01TUFLOW_SWMM_Module_01\TUFLOW\model\gisswmm folder and click Save. A Layer Name Window will open. Provide the following name: '''2d_bc_SWMM_Connections_001_L''' .<br>
 
<li>Now, you can check and modify the boundary lines as needed to cover the channels as per the example below:<br>
Retrieved from "https://wiki.tuflow.com/TUFLOW_SWMM_Tutorial_M01"