Difference between revisions of "EPA SWMM to TUFLOW"
| Line 8: | Line 8: | ||
== Utility Execution == | == Utility Execution == | ||
| − | The utility requires GIS projection information to correctly translate the SWMM file (.inp) from format to *mif or *.shp format. This is done by including either a projection or header file in the same folder directory as the | + | The utility requires GIS projection information to correctly translate the SWMM file (.inp) from format to *mif or *.shp format. This is done by including either a projection or header file in the same folder directory as the batch file. The utility will use the projection information from this file for the data conversion. |
<ol> | <ol> | ||
<li> mif format input requirement: Projection.mif or Header.mif | <li> mif format input requirement: Projection.mif or Header.mif | ||
Revision as of 11:16, 21 December 2023
Introduction
This page outlines some utilities that may be used to convert EPA SWMM model files into a format which is compatible with TUFLOW. The utilities are available for download from the TUFLOW website.
If you have any suggestions to be included in these pages, please contact support@tuflow.com.
Model Conversion Utility (swmm_to_gis.exe)
The swmm_to_gis.exe utility converts EPA SWMM files (.inp) to TUFLOW compatible GIS (mif and shp) format. The utility outputs include:
- T
Utility Execution
The utility requires GIS projection information to correctly translate the SWMM file (.inp) from format to *mif or *.shp format. This is done by including either a projection or header file in the same folder directory as the batch file. The utility will use the projection information from this file for the data conversion.
- mif format input requirement: Projection.mif or Header.mif
- shp format input requirement: Projection.prj or Header.prj
The following error message will be produced if projection information is not available:
ERROR - A Header.prj or Projection.prj file does not exist in folder