TUFLOW SWMM Tutorial M04: Difference between revisions
Content deleted Content added
Line 52:
<ol>
<li>Navigate to the '''TUFLOW_SWMM_Module_04\Tutorial_Data''' folder. Copy the '''TS04_Event_File.tef''' to the '''TUFLOW_SWMM_Module_04\TUFLOW\runs''' folder.
<li>Open the TEF in a
:*Event Magnitudes: 5% , 2% and 1% AEP
:*Event Durations:
<li>The event specific commands are contained between the <font color="blue"><tt>Define Event</tt></font> and <font color="blue"><tt>End Define</tt></font> commands.
<li>The <font color="blue"><tt>BC Event Source</tt></font> command is linked to the bc_dbase file ('''bc_dbase_TS04_001.csv'''). In the below examples, any occurrence of '~AEP~' in '''bc_dbase_TS04_001.csv''' will be replaced with '05p' and any occurrence of '~DUR~' in '''bc_dbase_TS04_001.csv''' will be replaced with '1hr'. Also, when the 1 hour event is called the simulation, the end time will be set to 2 hours (instead of 3 hours, as per the other simulations). <br>
<font color="green"><tt>! EVENT MAGNITUDES</tt></font><br>
<font color="blue"><tt>Define Event</tt></font> <font color="red"><tt> == </tt></font> <font color="black"><tt>05p</tt></font>
Line 66:
<font color="blue"><tt> End Time </tt></font> <font color="red"><tt>==</tt></font> <font color="black"><tt> 2</tt></font>
</ol><font color="blue"><tt>End Define</tt></font>
<li> When TUFLOW runs a simulation, it reads all of the defined events in the TEF, though only uses the event variables specified in the batch file. We will create a compatible batch file shortly.
<
{{Video|name=|width=1235}}
<br>
</ol>
=== TUFLOW Control File (TCF) ===
| |||