Revision as of 12:01, 6 February 2024 view source Emilie Nielsen (talk \| contribs) Administrators 6,330 edits →Convert Exported Data into TUFLOW SWMM Format ← Older edit		Revision as of 08:46, 7 February 2024 view source Emilie Nielsen (talk \| contribs) Administrators 6,330 edits No edit summary Newer edit →
Line 39: <ol> <li> Open your existing model in XPSWMM. <li> In the top dropdown menu options, navigate to Configuration >> Job control >> 2D Model Settings. This will open a dialog. <li> Under '2D Hydraulics Job Control', select 'Surface & Sampling'. <li> Review the options in the 'Surface' section: Line 62: <li> Locate the original 'Grid' file (.asc or .flt/.hdr format). Save it to the folder where XPSWMM writes the .tcf during its simulation preprocessing. By default, this is the '''2D\Data''' folder. <br> If this folder does not exist, either: :* The XPSWMM model has not run, so the TUFLOW control files have not been created by XPSWMM. Run the XPSWMM model (go to Analyze >> Solve... in top dropdown menu options). :* Non-default output settings have been specified in XPSWMM. To determine the output location, in the top dropdown menu options, go to Configuration >> Job Control >> 2D Model Settings >> Folder Options. Ensure the following 'Folder Locations' are selected: ::[[File: XPSWMM_to_TUFLOW_2DJobControl_FolderOptions_Dialog_01c.png]]<br> <br> <li> In the top dropdown menu options, navigate to Configuration >> Job ~~control~~Control >> 2D Model Settings. This will open a dialog, under '2D Hydraulics Job Control', select 'Surface & Sampling'. <li> Tick on 'Use grid file for topography' and select '...' to navigate to the Grid file saved in the '''2D\Data''' folder. This file will be read directly into TUFLOW. <li> Click 'OK' to save the settings. Line 82: <li> Save the file to the folder where XPSWMM writes the .tcf during its simulation preprocessing. By default, this is the '''2D\Data''' folder. <br> If this folder does not exist, either: :* The XPSWMM model has not run, so the TUFLOW control files have not been created by XPSWMM. Run the XPSWMM model (go to Analyze >> Solve... in top dropdown menu options). :* Non-default output settings have been specified in XPSWMM. To determine the output location, in the top dropdown menu options, go to Configuration >> Job Control >> 2D Model Settings >> Folder Options. Ensure the 'Folder Locations' shown in the image above are selected. <li> In the top dropdown menu options, navigate to Configuration >> Job Control >> 2D Model Settings. This will open a dialog, under '2D Hydraulics Job Control', select 'Surface & Sampling'. <li> Tick on 'Use grid file for topography' and select '...' to navigate to the Grid file saved in the '''2D\Data''' folder. This file will be read directly into TUFLOW. <li> Click 'OK' to save the settings. Line 227: [[File: XPSWMM_to_TUFLOW_toolbar_hydraulics_mode_01a.png\|700px]] <br> <li> From the XPSWMM top dropmenu select File >> Import/Export Data >> Export to EPASWMM5. The exported INP file will be saved to the same folder as the .xp project file. <li> When prompted to save changes, select 'Yes'. <li> Rename the exported INP file by adding 'HDR' to the file name. For example, '''1D2D_Urban_001.inp''' > '''1D2D_Urban_HDR_001.inp'''. Copy the renamed INP file into the '''TUFLOW\model\swmm''' folder. Line 311: <li> In the XPSWMM Layers panel, right click '''Nodes''' and select 'Export To GIS File...'. This will open a dialog. <li> Select the GIS File: Click the '...' and navigate to the '''TUFLOW\model\swmm''' folder. Enter an appropriate filename and set the file type to ESRI (.shp). For example, '''XPSWMM_Node_Export_001.shp''' <li> Click 'Node Data and Results' to expand the folder tree. Go to Node Data and Results >> Hydraulics Node >> HDR Node Data. Double click to select the following items: : Node 2D Inflow Capture Flag :* Ground Elevation (Spill Crest) Line 411: <ol> <li> Open the XPSWMM model. <li> Check whether the SWMM Hydrology runoff method has been used in your XPSWMM model by reviewing the selection from the following model settings: '''Configure >> Mode Properties >> Solver Mode >> Methods'''<br> [[File:XPSWMM_Hydrology_Methods.JPG \|800px]] <li> Select the Hydraulics mode: [[File: XPSWMM_Rnf_Icon_002.png \| 30px]].

XPSWMM to TUFLOW-SWMM: Difference between revisions