Revision as of 16:47, 7 February 2024 view source Emilie Nielsen (talk \| contribs) Administrators 6,412 edits →Export 1D EPA SWMM Pipe Network Data from XPSWMM ← Older edit		Revision as of 16:53, 7 February 2024 view source Emilie Nielsen (talk \| contribs) Administrators 6,412 edits →Create 1D/2D Culvert Connections Newer edit →
Line 390: :* Tick on 'Selected features only'. :* Create connections at: 'Both ends'. :* Offset Distance: This value is the distance from the channel endpoint to the midpoint of the BC line. The recommended value is 2. ~~:* Offset Distance: 2~~ :* Length of BC lines: 10This value should be similar the width of the channel. :* Tick on 'Set 2D cell elevation to 1D culvert invert at 1D/2D connection cells if needed'. :* Output Layer:

XPSWMM to TUFLOW-SWMM: Difference between revisions