Content deleted Content added
|
|
|
= Link 1D SWMM and 2D TUFLOW Model =
The linking ofbetween the 1D SWMM and the 2D TUFLOW model is doneestablished within the TUFLOW control files ., These fileswhich are requiredessential for running TUFLOW-SWMM simulations. The stepsfollowing belowsteps outline the basic commands requiredneeded to complete the linking process and runexecute the model. Based on the modelling task, furtherThese commands may need to be addedmodified ordepending removedon the modeling task. ▼<font color="red"><tt>Emilie, I haven't worked on the text below (it was Pavlina's notes)- you're welcome to if you feel confident doing it </tt></font>
▲The linking of the 1D SWMM and the 2D TUFLOW model is done within the TUFLOW control files. These files are required for running TUFLOW-SWMM. The steps below outline the basic commands required to complete the linking and run the model. Based on the modelling task, further commands may need to be added or removed.
As XPSWMM writes TUFLOW model files, in the u>[[#Convert_XPSWMM_Model_to_Recommended_TUFLOW_Structure | Convert XPSWMM Model to Recommended TUFLOW Structure]]</u> section, the TUFLOW control files created by XPSWMM were transferred into their respective places in the '''TUFLOW''' folder. The TBC and TGC files were transferred to the '''TUFLOW\model''' folder, and the TCF file was transferred to the '''TUFLOW\model\runs''' folder.
The following steps will require use of a text editor. The tutorial demonstration uses Notepad++. For its configuration information refer to <u>[[NotepadPlusPlus_Tips | Notepad++ Tips]]</u>. <br>
|