XPSWMM to TUFLOW-SWMM

Page Under Construction - Expected Finalization date: 23 February 2024

Introduction

This Wiki page outlines recommended steps for conversion of an XPSWMM model to TUFLOW.

XPSWMM is a flood and urban stormwater drainage modeling software developed by Autodesk (previously Innovyze and XP Solutions). The XPSWMM solution uses EPA SWMM for its 1D calculations, dynamically linked to TUFLOW for its 2D calculations. The software functions within a custom build Graphical User interface (GUI). Unknown to many XPSWMM modelers, during simulation, XPSWMM processes its inputs into TUFLOW files and also calls TUFLOW for the 2D calculations. As XPSWMM uses TUFLOW for its 2D engine, like-for-like results can be achieved using these software. TUFLOW is the natural replacement for XPSWMM for people who are looking for an alternative solution following Autodesk's recent XPSWMM pricing, licensing and support changes.

Common user feedback suggests the XPSWMM GUI is useful for simple modeling projects; however, it can become cumbersome and workflow inefficient when dealing with larger datasets and/or a large volume of different scenario and event simulations. In response to requests from USA XPSWMM users who want to convert XPSWMM models into a native TUFLOW format, TUFLOW linkage with 1D EPA Storm Water Management Model (SWMM) was added as a supported feature in TUFLOW 2023-03-AD release. The modeling workflow in TUFLOW differs from XPSWMM, as TUFLOW modeling is integrated with QGIS (Geographical Information System) GIS software. This is however a net positive. GIS integration is well-suited for working with larger datasets. Additionally, the structural design associated with TUFLOW modeling makes its general workflow extremely efficient, particularly for the automated management of multiple scenarios and events.

If you are building a TUFLOW SWMM model from scratch, not from XPSWMM, please refer to the TUFLOW SWMM Tutorials. Tutorials are provided for the following topics:

• TUFLOW SWMM Module 1 - 1D SWMM Culverts
• TUFLOW SWMM Module 2 - 1D SWMM Pipe Network / 2D TUFLOW Direct Rainfall Hydrology
• TUFLOW SWMM Module 3 - 1D SWMM Pipe Network / 1D SWMM Urban Hydrology
• TUFLOW SWMM Module 4 - 1D SWMM Pipe Network / 1D SWMM Urban Hydrology: Executing multiple different event simulations from a single model control file.

TUFLOW Licensing / XPSWMM Discount

If you are an existing / or past XPSWMM perpetual license owner who would like to purchase a TUFLOW license, please contact sales@tuflow.com. You may be eligible for a XPSWMM / TUFLOW discount in recognition of past royalties Autodesk paid TUFLOW if you previously purchased an XPSWMM perpetual license.

Dataset Download

The XPSWMM model used for this model conversion demonstration is available for download here: XPSWMM to TUFLOW Model Conversion Dataset. If you are using this example conversion dataset, please rerun the XPSWMM model in the location where you save the dataset before beginning the conversion to TUFLOW process. Rerunning the model is necessary because XPSWMM will write TUFLOW files during its preprocessing, subsequently defining the correct file path information (for the location where you saved your files) in the newly written TUFLOW files.

After completing the model conversion steps outlined in the following sections, if you would like to compare your constructed model against the version that was used for the various embedded videos, you can download the TUFLOW SWMM model dataset from: <<link>>

XPSWMM to TUFLOW Model Conversion

Two Dimensional (2D) Model Elements

XPSWMM writes TUFLOW model files during its prepossessing of the the model inputs defined in its GUI (prior to the hydraulic calculations). By default, XPSWMM usually writes the TUFLOW files to the 2D\Data folder. The 2D model elements within the XPSWMM model must be exported and formatted for use by TUFLOW. To accomplish this, please follow the links provided below:

1. Digital Terrain Model (DTM) Data Processing
2. Convert XPSWMM Model to Recommended TUFLOW Structure
3. Load Model in QGIS

One Dimensional (1D) SWMM Model Elements

The 1D culvert, pipe network and sub-catchment hydrology EPA SWMM items in the XPSWMM model require exporting and reconfiguring for compatibility with TUFLOW. Please follow the suggested workflow and instructions provided in the links below:

1. Export 1D EPA SWMM Pipe Network Data from XPSWMM
2. Configure 1D EPA SWMM Pipe Network Data for TUFLOW
3. Export SWMM Hydrology
4. Update SWMM Junction Data
5. Export Update SWMM INP Files

TUFLOW Control File Updates

The linking between the 2D TUFLOW model and 1D SWMM is established within the TUFLOW control files. The following sections (linked below) outline the basic commands needed to complete the linking process and execute the model. This will require use of a text editor. The tutorial demonstration uses Notepad++. For its configuration information refer to Notepad++ Tips. For a clean and organized model, it is recommended to name all the TUFLOW control files similarly. For example, 1D2D_Urban_001.tscf, 1D2D_Urban_001.tbc, 1D2D_Urban_001.tgc and 1D2D_Urban_5m_001.tcf.

Note: For this demonstration, all commands will reference the datasets in the provided conversion model. Please update these references with the filenames used in your model.

1. TUFLOW SWMM Control File (TSCF)
2. TUFLOW Boundary Control File (TBC)
3. TUFLOW Geometry Control File (TGC)
4. TUFLOW Control File (TCF)
5. Optional: Format TUFLOW Control Files

Feedback / Suggestions

If you have any suggestions to be included in these pages, please email support@tuflow.com.

Up
Back to Main Page