Difference between revisions of "XPSWMM Conversion TUFLOW Boundary Control File (TBC)"
Jump to navigation
Jump to search
| Line 14: | Line 14: | ||
{{Tips Navigation | {{Tips Navigation | ||
| − | |uplink=[[XPSWMM_Conversion_TUFLOW_Geometry_Control_File_(TGC) | Continue to Next Step:"TUFLOW Geometry Control File (TGC)"]] | + | |uplink=[[XPSWMM_Conversion_TUFLOW_Geometry_Control_File_(TGC) | Continue to Next Step: "TUFLOW Geometry Control File (TGC)"]] |
}} | }} | ||
{{Tips Navigation | {{Tips Navigation | ||
|uplink=[[XPSWMM_to_TUFLOW-SWMM#TUFLOW_Control_File_Updates| Back to Main XPSWMM to TUFLOW Conversion Page]] | |uplink=[[XPSWMM_to_TUFLOW-SWMM#TUFLOW_Control_File_Updates| Back to Main XPSWMM to TUFLOW Conversion Page]] | ||
}} | }} | ||
Revision as of 14:38, 23 February 2024
TUFLOW Boundary Control File (TBC)
The TUFLOW Boundary Control File (TBC) contains information regarding the location of 2D boundary conditions and internal 1D/2D links within the model.
- In Windows File Explorer, navigate to the TUFLOW\model folder and open the TBC using a text editor (Notepad++ is recommended).
- Remove the reference to the 2d_bc points layer. This layer was removed from the model GeoPackage in the Export 1D EPA SWMM Pipe Network Data from XPSWMM section.
- The TBC should reference the 2D boundary condition layer and the 1D/2D connection layer. In this case, they are both included in the 2d_bc lines connections layer so the TBC contains only one command:
Read GIS BC == 1D2D_Urban_001_2d_bc_L ! Reads in 2D inflow/outflow boundaries and links 1D SWMM through embankment culverts to the 2D TUFLOW domain - Save the TBC.
| Up |
|---|
 Continue to Next Step: "TUFLOW Geometry Control File (TGC)"
|
| Up |
|---|
| Back to Main XPSWMM to TUFLOW Conversion Page
|