Difference between revisions of "TUFLOW Message 2816"
| Line 10: | Line 10: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=TUFLOW is unable to read the input. | |message_desc=TUFLOW is unable to read the input. | ||
| − | |suggestions=Check that the input is correct. For example "Set IWL ==" is expecting an integer value and ERROR 2816 may be produced if you are reading in an input later (e.g. 2d_iwl_R.shp) which instead should be read in using "Read GIS IWL". Otherwise, please contact [mailto:support@tuflow.com support@tuflow.com]. | + | |suggestions=Check that the input is correct. For example "<font color="blue"><tt>Set IWL </tt></font> <font color="red"><tt>==</tt></font>" is expecting an integer value and ERROR 2816 may be produced if you are reading in an input later (e.g. 2d_iwl_R.shp) which instead should be read in using the "<font color="blue"><tt>Read GIS IWL</tt></font> <font color="red"><tt>==</tt></font>" command. Otherwise, please contact [mailto:support@tuflow.com support@tuflow.com]. |
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
}} | }} | ||
Revision as of 21:35, 29 February 2024
TUFLOW Message
ERROR 2816 - Unable to read integer value from "Set Code" line.
Alternate Message
ERROR 2816 - Unable to read code value from "Read GIS Code BC ==" polygon when processing Quadtree mesh.
ERROR 2816 - Unable to read code value from "Read GIS Code ==" polygon when processing Quadtree mesh.
ERROR 2816 - Unable to read IWL value after "Set IWL ==".
ERROR 2816 - Unable to read IWL value.
Message Type
ERROR
Description
TUFLOW is unable to read the input.
Suggestions
Check that the input is correct. For example "Set IWL ==" is expecting an integer value and ERROR 2816 may be produced if you are reading in an input later (e.g. 2d_iwl_R.shp) which instead should be read in using the "Read GIS IWL ==" command. Otherwise, please contact support@tuflow.com.
| Up |
|---|
 2xxx Messages
|