Revision as of 15:57, 20 February 2025 view source Emilie Nielsen (talk \| contribs) Administrators 6,249 edits No edit summary ← Older edit		Revision as of 11:51, 28 April 2025 view source Pavlina Monhartova (talk \| contribs) Bureaucrats, Administrators 5,384 edits No edit summary Newer edit →
Line 1: {{TUFLOW_Message \|tuflow_message=ERROR 3517: - Z Shape Route not supported yet in SGS. Please contact support@tuflow.com. <br> \|alt_msg=ERROR 3517: - HX 2D BC not supported yet in SGS. Please contact support@tuflow.com.<br> ERROR 3517: - Interpolate ZUVH not supported yet in SGS. Please contact support@tuflow.com.<br> ERROR 3517: - ZC == MIN(ZU,ZV) not supported yet in SGS. Please contact support@tuflow.com.<br> ERROR 3517: - FC not supported yet in SGS. Please contact support@tuflow.com.<br> ERROR 3517: - "Read RowCol Zpt" not supported with Quadtree.<br> ERROR 3517 - "Read RowCol Zpt" not supported in SGS.<br> etc \|type=[[ERROR]] \|message_desc=These commands/functions are not supported in either SGS or Quadtree (depending on the message received) with the used TUFLOW version. ~~<br>~~<br> If the message received is "ERROR 3517 - "Read RowCol Zpt" not supported with Quadtree" this is because the GIS layer is cell size dependent ~~therefore~~and cannot be used in a Quadtree model, as they have multiple cell sizes. \|suggestions= Use the latest version of TUFLOW available from the TUFLOW website. Alternatively, remove these features to run in SGS (or Quadtree depending on the message)~~, or contact <u>[mailto:support@tuflow.com support@tuflow.com]</u> for further assistance~~. If the message received is "ERROR 3517 - "FC" not supported yet in SGS" this is because a GIS 2d_fcsh layer is used. Change this to a 2d_lfcsh layer which is supported when using SGS. If the message received is "ERROR 3517 - "Read RowCol Zpt" not supported with Quadtree" or "ERROR 3517 - "Read RowCol Zpt" not supported in SGS" use the source that the layer was originally generated from. Alternatively, if you have both .mid/.mif it is possible to generate a raster within QGIS which can be read into TUFLOW instead. If there is no .mif file, this can be generated in TUFLOW using the following in the TGC (anywhere the zpt layer is not 99 will be the original sample points and elevations):<br> <font color="blue"><tt>Set Zpts<font color="red"><tt>== </tt></font> <font color="black"><tt>99</tt></font><br> <font color="blue"><tt>Read MID Zpts<font color="red"><tt>== </tt></font> <font color="black"><tt>input_file.mid</tt></font><br>

TUFLOW Message 3517: Difference between revisions