Tuflow

TUFLOW CATCH Tutorial M01 Project Initialisation QGIS: Difference between revisions

Browse history interactively
Newer edit →
Content deleted Content added
VisualWikitext
Created page with "= Introduction = QGIS is used to configure the TUFLOW CATCH project with the TUFLOW CATCH plugin. For installation, see <font color=red>create page</font> TUFLOW_CATCH_QGIS..."
 
Line 1:
== Introduction = =
QGIS is used to configure the TUFLOW CATCH project with the TUFLOW CATCH plugin. For installation, see <font color=red>create page</font> [[TUFLOW_CATCH_QGIS_Plugin | TUFLOW CATCH QGIS Plugin]]</u>.
 
There are three steps to set up the TUFLOW CATCH project:
<ol>
<li>Define the QGIS Project Coordinate Reference System (CRS).
<li>Use the TUFLOW CATCH plugin to create the model folder structure and to write empty GIS files for model inputs.
<li>Set up and save the QGIS workspace
</ol>
 
== Coordinate Reference System (CRS) ==
Define the CRS, also called 'Projection', for the QGIS workspace:
<ol>
<li> Open QGIS.
<li> Go to
Retrieved from "https://wiki.tuflow.com/TUFLOW_CATCH_Tutorial_M01_Project_Initialisation_QGIS"