Tutorial M05 Results QGIS

Introduction

QGIS is used to view the 1D time series results with the TUFLOW Viewer. For viewing of the 2D map results, see Module 1.

Method

Plot Time Series results through the pipe network:

1. Open the Time Series results, by either:
2. Within the QGIS Browser Panel drag the following layers into the QGIS workspace,
   • M05_5m_001_PLOT_L
   • M05_5m_001_PLOT_P
     
   Or drag and drop the M05_5m_001.tpc from the Module_05\TUFLOW\results\plot folder > to select the time series output results.
3. Select the M05_5m_001_PLOT_L file in the Layers panel and click on the 'Tuflow Viewer Plot Window' icon. The plot widget will open.
   
4. Select the Data Type "Flow" and use the 'Selection' icon to highlight one of the 1d_nwk lines (to highlight multiple hold down shift and select multiple 1d_nwk lines). This plots the flow for one or multiple 1d_nwk elements.
   
   
   
   

   
   

Plot longitudinal profiles from the Time Series datasets:

1. Use the Section Plot tab, select the Data Types 'Pipes', 'Pits' and 'Water Level' and Draw icon to see the pits, pipes ground levels and water levels over time display in the Section Plot tab.
   
   
   
   

Conclusion

• Both the 1D and 2D results were viewed confirming the the pipe network was getting flows through the pit 1D/2D links and the water was discharging from the downstream pipe to the 2D domain.
• For further functionality, see TUFLOW Viewer 2 documentation.

Up
Back to Module 5 Main Page