Revision as of 13:02, 3 June 2026

Introduction

QGIS is used to view the model results with the TUFLOW Viewer 2. For viewing of the 2D map results, see Module 1.

Inspect the resolution of the outputs:

Open the Map Outputs and Time Series results, either:
- Within the QGIS Browser Panel drag the following layers into the QGIS workspace, or
- Module_07\TUFLOW\results\M07_5m_001.xmdf > loads the map output mesh results
- In File Explorer, navigate to the files above and drag and drop them into the QGIS workspace.
Open an additional file from within the QGIS Browser Panel, drag the following layer into the QGIS workspace:
- Module_07\TUFLOW\model\gis\M07_001.gpkg\M07_5m_001_grd_check_R > loads the grid check layer.
In the 'Layer Styling' panel, turn on the Vector Velocity and Velocity from the Result Type panel. View the finer resolution of vectors within the level 2 grid compared to the level 1 grid:

The velocity and vector velocity outputs were inspected in relation to the grid resolution.
For further functionality, see TUFLOW Viewer 2 documentation.

Up
Back to Module 7 Main Page

@@ Line 11: / Line 11: @@
 * In File Explorer, navigate to the files above and drag and drop them into the QGIS workspace.
 <li>Open an additional file from within the QGIS Browser Panel, drag the following layer into the QGIS workspace:
-:* '''Module_07\TUFLOW\model\gis\M07_001.gpkg\M07_5m_001_grd_check_R''' > loads the model materials layer.
+:* '''Module_07\TUFLOW\model\gis\M07_001.gpkg\M07_5m_001_grd_check_R''' > loads the grid check layer.
 <li>In the 'Layer Styling' panel, turn on the Vector Velocity and Velocity from the Result Type panel. View the finer resolution of vectors within the level 2 grid compared to the level 1 grid:<br>
 <br>