TUFLOW Message 2663: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
Ellis Symons (talk | contribs) No edit summary |
Ellis Symons (talk | contribs) No edit summary |
||
| Line 4: | Line 4: | ||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=Gauge level outputs (GLO) replace the conventional approach of using a "Start Map Output" time and "Map Output Interval" (i.e. it is not possible to get map outputs using a gauge location and also at a regular intervals). |
|message_desc=Gauge level outputs (GLO) replace the conventional approach of using a "Start Map Output" time and "Map Output Interval" (i.e. it is not possible to get map outputs using a gauge location and also at a regular intervals). |
||
|suggestions=Remove the "Read GIS GLO" command if map outputs at a regular interval |
|suggestions=Remove the "Read GIS GLO" command if map outputs at a regular interval are desired. |
||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] |
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] |
||
Latest revision as of 00:40, 27 June 2026
TUFLOW Message
ERROR 2663 - Disabling temporal output due to GLO output.
Alternate Message
N/A
Message Type
ERROR
Description
Gauge level outputs (GLO) replace the conventional approach of using a "Start Map Output" time and "Map Output Interval" (i.e. it is not possible to get map outputs using a gauge location and also at a regular intervals).
Suggestions
Remove the "Read GIS GLO" command if map outputs at a regular interval are desired.
| Up |
|---|
 2xxx Messages
|