TUFLOW Message 1066: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
Created page with '{{TUFLOW_Message |tuflow_message=ERROR 1066 - Invalid P value(s) specified for cross-section ",a," in ",a, |alt_msg=NA |type=ERROR |message_desc=???? |suggestions=???? |discu...' |
No edit summary |
||
| Line 3: | Line 3: | ||
|alt_msg=NA |
|alt_msg=NA |
||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=For an XZ type cross-section the P values define the position of the XZ point. This indicates whether an XZ point is left bank (1), mainstream (2) or right bank (3). P values must be entered as 1, 2 or 3. For more details see Section 4.6.6.4 Position Flag of TUFLOW manual (2010 version). |
|||
|message_desc=???? |
|||
|suggestions= |
|suggestions=If using P values, these must be either 1, 2 or 3. |
||
|discussion_page=* [[Talk:TUFLOW Message 1066|Discuss Message 1066]] |
|discussion_page=* [[Talk:TUFLOW Message 1066|Discuss Message 1066]] |
||
|link3='' |
|link3='' |
||
Revision as of 15:45, 31 January 2011
TUFLOW Message
ERROR 1066 - Invalid P value(s) specified for cross-section ",a," in ",a,
Alternate Message
NA
Message Type
ERROR
Description
For an XZ type cross-section the P values define the position of the XZ point. This indicates whether an XZ point is left bank (1), mainstream (2) or right bank (3). P values must be entered as 1, 2 or 3. For more details see Section 4.6.6.4 Position Flag of TUFLOW manual (2010 version).
Suggestions
If using P values, these must be either 1, 2 or 3.
| Up |
|---|
 1xxx Messages
|