TUFLOW Message 2441: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2441 - HQ boundaries not yet supported for GPU Solver. |alt_msg=NA |type=ERROR |message_desc=The stage-discharge (HQ) boundaries ar..." |
No edit summary |
||
| Line 8: | Line 8: | ||
|link3='' |
|link3='' |
||
|link4='' |
|link4='' |
||
|prelink=[[ |
|prelink=[[TUFLOW_Message_2440|Message 2440]] |
||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] |
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] |
||
|nextlink=[[TUFLOW_Message_2450|Message 2450]] |
|nextlink=[[TUFLOW_Message_2450|Message 2450]] |
||
Revision as of 09:27, 10 April 2015
TUFLOW Message
ERROR 2441 - HQ boundaries not yet supported for GPU Solver.
Alternate Message
NA
Message Type
ERROR
Description
The stage-discharge (HQ) boundaries are not yet available in the TUFLOW GPU module.
Suggestions
The HQ boundary will need to be replaced with a HT boundary. If the water level is at ground level or below, normal flow is applied at the boundary.
| Up |
|---|
 2xxx Messages
|